Undergraduate International Program (S1 Kelas Khusus Internasional)
We offer the undergraduate joint degree international program and the undergraduate single degree program. In the joint degree program, Students are required to complete two to three years of study at Universitas Indonesia (UI) and another one to two years at one of our partner Universities. Available partner universities for double degree programs in Electrical Engineering are: Queensland University of Technology (QUT), The University of Queensland (UQ), and The University of Duissburg Essen (UDE), Germany. Students must fulfill the following requirements to continue their study in the partner university:
- Minimum GPA of 3.00 at the end of the fourth semester (Australia) or sixth semester (Germany).
- Passed all required subjects with a minimum C.
- For students transferring to partner universities in Australia: Minimum IELTS score of 6.5 with no bands lower than 6.0 or TOEFL score >80 (iBT, with no bands lower than 20).
- For students transferring to UDE, Germany: A minimum of B1 level in Germany and TOEFL score >550 (paper based) or IELTS with a minimum overall score of 6.0 with no bands lower than 5.0.
Upon the completion of their studies in the partner university, students will be awarded a Bachelor of Engineering degree from our partner university and a Sarjana Teknik degree when they return to UI and fulfill certain requirements.
In the single degree program, students are not required to continue their study at one of our partner universities in their last four semesters. However, students in this program are required to spend at least one semester in one of the overseas partner universities, which can be found here: https://international.ui.ac.id/wp-content/uploads/2021/05/Data-Seluruh-Naskah-Kerjasama-JUNI-2021.pdf. Both undergraduate single degree and undergraduate joint degree programs have total of 144 credits and are to be completed in 8-12 semesters.
The curriculum structure for the international program is shown below.
Code | Course | Credit |
ENGE610003 | Calculus | 4 |
ENGE610007 | Physics (Electric, Magnet, Optic, and Wave) | 3 |
ENGE610008 | Physics (Electric, Magnet, Optic, and Wave) Laboratory | 1 |
ENGE610004 | Linear Algebra | 4 |
ENEE611001 | Introduction to Electrical Engineering | 2 |
ENEE611002 | Fundamentals of Digital System and Laboratory | 3 |
UIGE610002 | Academic Writing | 2 |
Subtotal | 19 |
Code | Course | Credit |
ENGE610005 | Physics (Mechanics and Heat) | 3 |
ENGE610006 | Physics (Mechanics and Heat) Laboratory | 1 |
ENEE612003 | Basic Computer and Laboratory | 3 |
ENEE612004 | Probability and Statistics | 4 |
ENEE612005 | Vector and Complex Variable Analysis | 2 |
ENEE612006 | Electric Circuit 1 | 3 |
ENEE612007 | Physics of Semiconductor | 2 |
ENEE612008 | Engineering Mathematics | 4 |
Subtotal | 22 |
Code | Course | Credit |
ENEE613009 | Electric Circuit 2 | 3 |
ENEE613010 | Electric Circuit Laboratory | 1 |
ENEE613011 | Signal & Systems | 3 |
ENEE613012 | Electromagnetics | 4 |
ENEE613013 | Introduction to Telecommunication System | 3 |
ENEE613014 | Telecommunication system Laboratory | 1 |
ENEE613015 | Electronic Circuits 1 | 2 |
ENEE613016 | Electronic Circuits Laboratory | 1 |
ENEE613017 | Electrical Measurements | 2 |
ENEE613018 | Advanced Linear Algebra | 2 |
Subtotal | 22 |
Code | Course | Credit |
ENEE614019 | Control Engineering | 3 |
ENEE614020 | Control Engineering Laboratory | 1 |
ENEE614021 | Electronic Circuits 2 | 2 |
ENEE614022 | Electrical Measurements Laboratory | 1 |
ENEE614023 | Numerical Computation | 2 |
ENEE614024 | Electrical Materials | 2 |
ENEE614025 | Embedded System 1 | 3 |
ENEE614026 | Electrical Power Engineering | 3 |
ENEE614027 | Electrical Power Engineering Laboratory | 1 |
ENEE614028 | Algorithm and Programming | 3 |
Subtotal | 21 |
Code | Course | Credit |
UIGE610005-9 | Religion | 2 |
ENEE616029 | Modeling and Machine Learning | 3 |
ENEE615030 | Embedded System 2 | 3 |
ENEE614031 | Embedded System Laboratory | 1 |
ENEE613032 | Power Electronics and Laboratory | 3 |
ENEE612033 | Electric Motor Control System | 3 |
ENEE611034 | Wireless Communication and Convergence Networks | 3 |
ENEE610035 | Electronic Instrumentation Design | 2 |
Subtotal | 20 |
Code | Course | Credit |
UIGE610001 | Integrated Characteristic Building | 5 |
ENEE616036 | Autonomous Vehicle System | 3 |
ENEE616037 | Electrical Engineering Project Design 1 | 2 |
ENEE616038 | Introduction to Nanoelectronics | 2 |
ENEE616039 | Electric Power System and Laboratory | 3 |
ENEE616040 | Telecommunication System Devices | 3 |
ENEE616041 | Internship | 2 |
ENEE616042 | Innovation and Entrepreneurship | 2 |
Subtotal | 22 |
Code | Course | Credit |
ENGE610012 | Health, Safety & Environment | 2 |
ENEE617043 | Electrical Engineering Project Design 2 | 3 |
ENEE617044 | Optoelectronic Devices | 2 |
ENEE617045 | Pra-Bachelor Thesis | 2 |
Electives | 3 | |
Subtotal | 12 |
Code | Course | Credit |
ENEE618047 | Bachelor Thesis | 4 |
Electives | 2 | |
Subtotal | 6 | |
Total | 144 |
More information on the curriculum can be found at:
http://eng.ui.ac.id/FTUI-Academic-Guidebook-2020-2021-November-2021-2.pdf
Also, the information of the international program can be found at this brochure:
http://eng.ui.ac.id/BROSUR-S1-KELAS-INTERNASIONAL-FTUI-2021.pdf